Britax Child Seat Guia do Utilizador

PLEASE READINSTRUCTIONSSTORE UNDERCOVERBoulevard®User Guide

1617Verify that vehicle belt is tight, locked, and 8 that the child seat is secure. The child seat is secure when it cannot be •moved more than 1 in.

1819If stored, remove the LATCH connectors from 1 the storage slots under the cover (see page 30) and route through their adjacent rear-facing belt sl

2021IMPORTANT: Britax recommends that the Versa-Tether® be used at all times. Using the tether will improve the stability of the child seat and reduce

2223Verify that the vehicle belt is not twisted, is 4 routed under the LATCH bars, then buckle (Fig. B).Push the child seat firmly into the vehicle 5

2425This child seat is certified for aircraft use. Most airlines in the U.S. and Canada will allow the use of a child seat as long as it is labeled as

2627ORaORbcWARNING! Only use the tether connector strap for rear-facing tether installation when there is NOT a designated vehicle tether anchor.dUsin

2829Figure A shows the tether when the child seat is acceptable for continued use (provided the child seat has not been involved in a crash). The colo

3031Storing the LATCH ConnectorsWhen the LATCH connector is not in use, lift the cover to access the LATCH storage slots (Fig. A). Fold the LATCH adju

3233Harness BuckleFastening the Harness BuckleHold the harness buckle with one hand.1 Use your other hand to insert one buckle 2 tongue at a time into

3435Gently pull up on the harness straps to 8 tighten lap section of the harness which should fit across the child’s upper thighs.Important checklist

©2009 Britax Child Safety, Inc. All rights reserved. Printed in U.S.A P363200 R1:04.09This product and its components are subject to change without n

3637Cover RemovalRemove the infant body pillow.1 Loosen the harness by lifting the harness 2 adjuster lever while pulling both shoulder straps forward

3839Harness Buckle RemovalRecline the child seat.1 Locate the metal buckle strap retainer on the 2 bottom of the child seat.Pull the retainer away fro

4041This child seat was manufactured by Britax Child Safety, Inc. Britax® warrants this product to the original retail purchaser as follows:LIMITED ON

4243NotesNotes

Double Check Car Seat-to-Vehicle Installation:Check that the LATCH or vehicle seat belt connections to the vehicle are tight and secure.Verify the

23WARNING!DEATH or SERIOUS INJURY CAN OCCUR:Use only in a rear-facing position when using it with an infant •weighing less than 20 lbs (9.1 kg) OR is

45Important NotesVerify that the child seat is securely installed and the harness is properly •adjusted around the child each time the child seat is

67Important Harness AdjustmentsAccording to the American Academy of Pediatrics: All infants should ride rear-facing until they have reached at least

89 1 2 4 5 6 7 8910121314151617181119 20 23 21 22242526 3Cover1 LATCH Bar2 Rear-Facing Lock-Off3 LATCH Adjuster Release Button4 LATCH Adjuster 5 LATCH

1011Incompatible Vehicle Seat BeltsVehicle Seat Belt Information Vehicle CompatibilityWARNING! The position of the vehicle belt buckle can adversely a

1213NOTE: If an audible click is not heard when connecting either LATCH connector, the LATCH strap may be twisted, or there may be debris in the LATCH

1415To prevent damage, never extend the lock-•off arm beyond its normal open position and always keep the lock-off closed when it is not in use.If yo